Skip to main content

How to hack Wifi using fern wifi cracker

 Fern wifi cracker is one of the tool to crack wifi 

First we should turn the wireless card into monitoring mode. To do this, Type below command "airmon-ng strat wlan0" in the terminal.


Now open fern wifi cracker

Step 1 : Application →click wireless attacks →Fern wifi cracker


Step 2 : select wlan0 



Step 3 : click "scan for access point"


Step 4 : after finishing scan, it will show wireless network found.


Step 5 : Click wifi wpa network as shown in the above screenshot.it will show wireless found.Generally in wpa n/w it performs Dictionary attack.

Step 6 : click Browse and find the rockyou.txt to use for attack

Step 7 : click Wifi attack


Step 8 : After finishing the dictionary attack it found the password .


--------------------------Thank you to visit my page--------------------------------------

Comments

Post a Comment

Popular posts from this blog

How to Hack Wifi WPA,WPA2,WPA2 PSK in Termux

  How to Hack Wifi WPA,WPA2,WPA2 PSK  in Termux Wi-Fi All Hacking Tool Install       [Type the Command ] Step1: apt update && apt upgrade -y Step2:   apt install git Step3:  apt install python2 Step4:   git clone https://github.com/derv82/wifite.git Step5:  ls Step6:  cd wifite Step7:  python2 wifite.py       [open first page] Step8: git clone  https://github.com/derv82/wifite2 Step9 : ls Step10: cd wifite2 Step11:  ls Step12:  python2 Wifite.py I hope this information is useful for you. Please forgive any typos or incomplete sentences.
Post a Comment
Read more

ethernet frame format explanation || Cyber Exploit 2.0

 Ethernet Framing Preamble: Synchronize transmission timing  SFD(Start Frame Delimeter): Detects the beginning of the data Destinatio n Addres s (DA): 48 bit value repre s ents the destination MAC Addres s Source Addres s (S A): 48 bit value repre s ents the destination MAC Addres s Length or Type:  Ethernet version 1 use s a Length field  But the Ethernet version 2 uses a Type Field to identify the Network Layer protoc ol Data:  Packet sent to the DLL from the Network Layer  Size can be 46 to 1500 byte s Frame Chec k Sequence(FCS):  Stores the Cyclic Redundanc y Chec k(CRC) ans wer  Answer should be same in both source and destination Ethernet at the Data Link layer Responsible for Hardware Addressing  Hardware / MAC / Physical Address  Uniquely identifies each node of a network  48 bits specified in Hexadecimal format se parate d in six fields  Locate d on the Network Interfac e Card (NIC)  Other names - Burned-in- addres s(BIA)  Examples - 0000.0a12.3...
Post a Comment
Read more